Automatic upload settings can be made from the THETA settings screen

There are two ways to set up Automatic Upload, so please set up according to your situation.

• Set up Cloud Sync Configuration and then set up Automatic Upload
• Set up Automatic Upload from the THETA Settings screen (this manual)

‍

Set up Automatic Upload from the THETA Settings screen

To set up Automatic Upload, please do so at a location where you can connect to the Wi-Fi you want to connect to.

‍

Tap the THETA icon

SELECT THETA X FROM THE LIST OF REGISTERED RICOH THETA CAMERAS THAT YOU WANT TO CONNECT TO THE CLOUD

‍

Tap Automatic upload In Cloud Sync Configuration

Tap Select Wi-Fi to connect to

‍

Turn off the power saving mode on your camera

Swipe down from the top of the THETA X display panel to display the menu, and then tap the toggle for “Power Saving Mode.” The toggle will change from blue to gray.

Once you have finished settings, you can turn the power saving mode back on.

‍

From the list of Wi-Fi SSIDs displayed, select the SSID of the Wi-Fi you want to connect to, enter the desired password, and tap Connect

‍

Wait a moment after waiting the password

‍

When “Automatic Upload settings completed!” is displayed, the settings are complete.

‍