Link your smartphone and camera with the RICOH360 app
By connecting your smartphone to your camera, you can control your camera from your smartphone.
1. Turn on the THETA X
2. Swipe down from the top of the THETA X display panel, and tap the icons for the wireless LAN, Bluetooth® function and location information to turn them on (blue).
3. Open the RICOH360 app, log in, and tap [THETA] at the bottom of the screen.
4. Tap [Register].
5. Tap the Camera you want to Connect.
6. If asked for the camera's Serial No., check the last 8 digits of the Serial No. located on the bottom of the camera, excluding the first two letters.
7. Tap the camera's Serial No.
8. When ‘RICOH THETA has been discovered.’ appears, tap [Connect]
9. If the screen below appears, tap the [Connect] button displayed on the THETA X unit's screen.
10. When the completion screen appears, pairing between the THETA X and your smartphone is complete.
To take a picture with the connected THETA, tap Capture .
You can also use RICOH360 Cloud to automatically upload photos.