Security Threats
Necessary preparations
Images and video files stored on the RICOH360 THETA A1 are important information assets and require appropriate security measures to reduce the risk of information leakage and unauthorized use. For safe use, the operating environment and equipment must be properly configured according to the user's information security policy.
Means of Control
THETA can be controlled via wireless LAN, wired LAN, LTE dongle, USB, Bluetooth®, and buttons on the unit. The security risks for each of these are as follows
Specifications
| Control Method | Initialization | Risk | Starting Procedure |
| Wireless LAN AP (access point) mode | OFF | SSID and encryption key can be used to remotely connect and control the device, which requires proper management. | Enable the function before connecting from the device. |
| Wireless LAN CL (Client) Mode | OFF | Even if Digest Authentication is set, proper management is required because the user name and password can be controlled via WebAPI if they are compromised. | Enable the function after making the necessary settings for connection using the API. |
| Wired LAN | OFF | As with wireless LAN (CL mode), proper management is required. | A wired LAN adapter must be connected to the USB port. |
| LTE Dongle | OFF | Remote control using WebAPI is not possible. | LTE dongle must be connected to the USB port. |
| USB(MTP) | ON | By connecting to a PC via USB cable, images and video files stored in THETA can be retrieved. Please note the operating environment. | Connection via USB cable capable of data transmission is required. |
| USB(MSC) | OFF | By connecting to a PC with a USB cable, images and video files stored on the THETA can be retrieved. It is also possible to transfer files from an external device to the THETA; use only files output by the RICOH360 THETA A1. Pay attention to the operating environment. |
The function must be activated and connected with a USB cable capable of data communication. |
| Bluetooth® (Low Energy) (Low Energy) |
ON | Authentication by NumericComparison can be allowed by operating the device, and information can be acquired via BLEAPI, so please pay attention to the operating environment. | Requires a connection from the device. |
| Bluetooth® (Classic) (Classic) |
OFF | Allows connection to devices with specific profiles. | Requires registration of device connection using BLE. |
| Operation Buttons | No Lock | The power button turns power on and off, and the wireless button turns wireless LAN on and off. The combination of operation buttons can also be used to initialize settings. Please pay attention to the operating environment. | Power ON |
The configuration ranges and procedures associated with each operating method are as follows
Wireless LAN
Wireless LAN can be set to OFF, AP mode, or CL mode. Wireless LAN will not be turned off even in sleep mode.
How to use
You can switch between OFF, CL mode, and AP mode by pressing the WLAN button. You can also use the API to select the mode.
Setting value
| Set value | Initial value | Setting Method | Description | |
| Network type | OFF | WebAPI | Options._networkType | Network type to use |
| MTPAPI | N/A | |||
| BLEAPI | Set network type Set Options |
|||
| Wireless LAN antenna settings | MIMO | WebAPI | Options._wlanAntettaConfig |
SISO/MIMO switching |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
AP (Access Point) Mode
AP (Access Point) Mode
| Network Interface | Wireless LAN
1.WPA2-Personal 2.Encryption method: AES 3.Wireless LAN mode: Access Point The default specifications are as follows SSID: ""THETA""+""serial number""+"".OSC""" Encryption key (passphrase): Random 8-digit string The initial value of the encryption key can be confirmed by pressing the shutter release button for 2 seconds while holding down the WLAN button. |
| Service Protocol | HTTP |
| Service Protocol Authentication Method | None |
| Service Protocol Encryption Method | None | Provided Services | The Web API specification is available at https://docs-theta-api.ricoh360.com/web-api/index.html |
How to use
- Turn on the THETA and press the WLAN button to switch to AP mode.
- Search for the THETA's SSID (by default, the THETA's serial number (2 alphabetic characters + 8 digits) + .OSC) from the device you are using.
- Connect to THETA's SSID from the device you are using. At this time, you will need to enter the encryption key.
Setting value
| Setting value | Initial value | Setting Method | Description | |
| SSID | Serial number (2 alphabetic characters + 8 digits) + .OSC | WebAPI | Options._ssid Can be set/obtained in WLAN AP mode |
Name to identify the THETA's WLAN |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
| Encryption Key (Passphrase) | Set per device | WebAPI | Options.wifiPassword Encryption key can be set Options._defaultWifiPassword Allows you to get the factory default encryption key |
Encryption key used when connecting in AP mode Can be changed using the RICOH360 Smartphone App Passwords can be set to a length of eight digits, but this makes them vulnerable to brute force attacks. Please take measures such as making the password longer or selecting characters from multiple sets, including uppercase and lowercase letters, numbers, and special characters. |
| MTPAPI | N/A | |||
| BLEAPI | Set Options You can set the encryption key. Get Options Get the factory default encryption key Read WLAN password state Allows you to retrieve the encryption key update status |
|||
| Frequency setting | 2.4GHz | WebAPI | Options._wlanFrequency Can be set/retrieved in WLAN AP mode Can be retrieved in WLAN CL mode |
Frequency setting used in AP mode |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
CL (Client) Mode: Control via WebAPI
Specification
| Network Interface | Wireless LAN
1.Authentication Method: WEP, WPA/WPA2 PSK, WPA3-SAE 2.Encryption method: AES 3.Wireless LAN mode: Client(Station) SSID and password of the access point to be connected must be set. Wired LAN (USB-LAN adapter ) 1. 1.Authentication Method: WEP, WPA/WPA2 PSK, WPA3-SAE 2.Encryption method: AES |
| Service Protocol | HTTP Detect the camera IP address using mDNS |
| Service Protocol Authentication Method | HTTP Digest Access Authentication |
| Service Protocol Encryption Method | None | Provided Services | The Web API specification is available at https://docs-the ta-api.ricoh360.com/web-api/index.html |
How to use
When controlling via the API, digest authentication settings are required. Settings must also be made according to the network used.
When using Wireless LAN CL mode, select the frequency band to be used. The information of the router to be connected must also be registered. These settings must be configured using wireless LAN or BLE.
When setting up using wireless LAN (AP mode)
- Connect in AP mode.
- Set the user name and password for digest authentication.
- Set the frequency band to be used.
- Register the router to be connected.
When setting up via Bluetooth®.
- Turn on the THETA.
- Search for Bluetooth® (10-digit alphanumeric code beginning with AA) from the device to be used.
- When connecting from the device, a 6-digit PIN code will appear on both the device and the THETA, make sure both are the same and select OK.
- Depending on the device, you may be asked for permission to connect before the PIN code is displayed.
- Set the user name and password for Digest Authentication.
- Set the frequency band to be used.
- Register the router to be connected.
(A) Register router information directly (using Camera Control Command v2).
(B) Detect the router with THETA (using WLAN Control Command v2)
Setup Value
| Set value | Initial value | Setting Method | Description | |
| Frequency setting in CL mode | 2.4GHz:enable 5.2GHz:disable 5.8GHz:enable |
WebAPI | Options._wlanFrequencyCLmode Can be set/obtained in WLAN AP mode Can be obtained in WLAN CL mode |
Frequency setting used in CL mode |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
| Authentication Method | digest | WebAPI | N/A | Authentication method used in CL mode |
| MTPAPI | N/A | |||
| BLEAPI | N/A | |||
| Digest Authentication User Name | THETA+ serial number (2 alphabetic characters + 8 digits) | WebAPI | Options._username Can be set in WLAN AP mode |
User name used for digest authentication |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
| Digest Authentication Password | Not set | WebAPI | Options._password Can be set in WLAN AP mode |
Password to be used for Digest Authentication. Cannot be used unset. Passwords can be set to a length of eight digits, but this makes them vulnerable to brute force attacks. Please take measures such as making the password longer or selecting characters from multiple sets, including uppercase and lowercase letters, numbers, and special characters. |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
| Access Point Information | Not set | WebAPI | camera.setAccessPoint Can be set in WLAN AP mode |
Information on access point (router) to be connected in WLAN CL mode |
| MTPAPI | N/A | |||
| BLEAPI | Set Access Point |
|||
| Proxy Information | Not set | WebAPI | camera.setAccessPoint |
Proxy information to connect in wireless LAN CL mode |
| MTPAPI | N/A | |||
| BLEAPI | N/A | |||
Wired LAN
How to use
When controlling via API, digest authentication settings are required. Settings must also be made according to the network used.
These settings must be made using wireless LAN or BLE.
After completing the settings, connect the wired LAN adapter and connect it to the router with a wired LAN cable.
When setting up using wireless LAN (AP mode)
- Connect in AP mode.
- Set user name and password for Digest Authentication.
- Set the wired LAN connection configuration if necessary.
When setting up via Bluetooth®.
- Turn on the THETA.
- Search for Bluetooth® (10-digit alphanumeric code beginning with AA) from the device to be used.
- When connecting from the device, a 6-digit PIN code will appear on both the device and the THETA, make sure both are the same and select OK.
- Depending on the device, you may be asked for permission to connect before the PIN code is displayed.
- Set the user name and password for Digest Authentication.
- Set the wired LAN connection configuration if necessary.
Configuration Value
| Set value | Initial value | Setting Method | Description | |
| Wired LAN connection settings | ipAddressAllocation="dynamic" | WebAPI | Options._ethernetConfig Can be set/retrieved in WLAN AP/CL mode |
Configuration for wired LAN connection |
| MTPAPI | N/A | |||
| BLEAPI | N/A | |||
| Authentication method | digest | WebAPI | N/A | Authentication method used in CL mode |
| MTPAPI | N/A | |||
| BLEAPI | N/A | |||
| Digest Authentication User Name | THETA+ serial number (2 alphabetic characters + 8 digits) | WebAPI | Options._username Can be set in WLAN AP mode |
User name used for digest authentication |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
| Digest Authentication Password | Not set | WebAPI | Options._password Can be set in WLAN AP mode |
Password to be used for digest authentication. Cannot be used unset. Passwords can be set to a length of eight digits, but this makes them vulnerable to brute force attacks. Please take measures such as making the password longer or selecting characters from multiple sets, including uppercase and lowercase letters, numbers, and special characters. |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
CL (Client) Mode: Controlled by RICOH360 Cloud
Specifications of RICOH360 Cloud
| Network Interface | Wireless LAN
1.Authentication Method: WEP, WPA/WPA2 PSK, WPA3-SAE 2.Encryption method: AES 3.Wireless LAN mode: Client(Station) SSID and password for the access point to be connected must be set. Wired LAN (USB-LAN adapter ) 4G LTE (USB-LTE adapter ) Tethering connection 1.Authentication Method: WEP, WPA/WPA2 PSK, WPA3-SAE 2.Encryption method: AES |
| Service Protocol | MQTT |
| Service Protocol Authentication Method | MQTT connection with mutual TLS(mTLS) authentication |
| Service Protocol Encryption Method | TLS |
How to use
https://help.ricoh360.com/hc/en-us/articles/13383929357971-Registering-for-RICOH360-Cloud
CL (Client) mode: live streaming
Specifications
| Network Interface | Wireless LAN
1.Authentication Method: WPA2-Personal, WPA3-Personal Only, WPA3-Transition 2.Encryption method: AES 3.Wireless LAN mode: Client(Station) SSID and password of the access point to be connected must be set. Wired LAN (USB-LAN adapter ) 4G LTE (USB-LTE adapter ) Tethering connection 1.Authentication Method: WEP, WPA/WPA2 PSK, WPA3-SAE 2.Encryption method: AES |
| Service Protocol | WebRTC WebSocket-TLS |
| Service Protocol Authentication Method | JWT |
| Service Protocol Encryption Method | DTLS, SRTP, TLS |
Usage Method
In preparation
Mobile network (LTE dongle)
How to use
Connect the LTE dongle and configure your mobile network settings using wireless LAN or BLE as needed.
When setting up via Bluetooth®.
- Turn on the THETA.
- Search for Bluetooth® (10-digit alphanumeric code beginning with AA) from the device to be used.
- When connecting from the device, a 6-digit PIN code will appear on both the device and the THETA, make sure both are the same and select OK.
- Depending on the device, you may be asked for permission to connect before the PIN code is displayed.
- Configure mobile network settings as needed.
Configuration Value
| Configuration Value | Initial value | Setting method | Description | |
| Mobile Network Settings | plan-D roaming=OFF |
WebAPI | Options._mobileNetworkSetting Can be set/retrieved via BLE |
Plan used and roaming settings |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
Bluetooth
Bluetooth® Low Energy (BLE) and Bluetooth® Classic are controlled separately. By default, BLE is always enabled; to control THETA, you must connect via BLE.
Specifications
| Interface | Bluetooth® Low Energy
1.Profile: GATT 2.Security: Some models have multiple connections. BLE(standard) - BLE Security mode 1 - BLE Security Connections level4 - Numeric Comparison Pairing (Bluetooth® standard 4.2 or higher) * Supports characteristics that correspond to BLE Security mode 1/BLE Security Connections level 4. 3. 3.BLE mode: Peripheral |
| Service Protocol | GATT |
| Service Protocol Authentication Method | BLE(standard) FIPS, Numeric Comparison Pairing |
| Service Protocol Encryption Method | BLE(standard) AES-CCM |
Provided Services | The Bluetooth® API specification is available at https://docs-theta-api.ricoh360.com/bluetooth-api/ Camera control command v2 service WLAN Control Command service WLAN Control Command v2 service Bluetooth Control Command service Registration to RICOH360 Cloud can only be performed with RICOH applications. |
How to use
BLE is always enabled by default. If disabled, it must be enabled by using the API or by resetting the settings operation. The device can be controlled as a peripheral device when connected according to the following procedure.
- Turn on the THETA.
- Search for THETA (10-digit alphanumeric code starting with AA) via Bluetooth® from the device to be used.
- Once connected from the device, both the device and the THETA will display a 6-digit PIN code, make sure both are the same and select OK.
- Depending on the device, you may be asked for permission to connect before the PIN code is displayed.
To connect an external device such as a headset or remote controller, you must register the Bluetooth® device as follows
- Connect the THETA as a peripheral.
- Put the external device into pairing mode.
- Scan the external device with the THETA using the Bluetooth® API.
- Register the external device using the scan results.
Press and hold the WLAN button or enable Bluetooth® in the API to search for external devices and connect to registered devices.
Setting value
| Setting value | Initial value | Setting Method | Description | |
| Enable BLE | true | WebAPI | Options._bluetoothLowEnergyEnable Can be set/retrieved in WLAN AP/CL mode |
Enables/disables BLE |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
| Bluetooth® Status | OFF | WebAPI | Options.bluetoothPower Can be set/retrieved in WLAN AP/CL mode |
Enables/disables Bluetooth® switching This value only affects Bluetooth® Classic. If no registered device is found, it will turn off after 30 seconds. |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
| Search for Bluetooth® peripherals | OFF | WebAPI | N/A | |
| MTPAPI | N/A | |||
| BLEAPI | Scan Bluetooth peripheral device |
|||
| Notification of scanned Bluetooth® peripheral devices | OFF | WebAPI | N/A | |
| MTPAPI | N/A | |||
| BLEAPI | Notification scanned Bluetooth peripheral device |
|||
| Bluetooth® peripheral device connection and registration | OFF | WebAPI | N/A | |
| MTPAPI | N/A | |||
| BLEAPI | Connect Bluetooth peripheral device |
|||
USB
Specification
| Interface | Compliant with the following standards: USB Spec.3.2 super speed standard USB2.0 High speed standard |
| Service Protocol | MSC (Mass Storage Class) MTP (Media Transfer Protocol) |
| Service Protocol Authentication Method | None |
| Service Protocol Encryption Method | None | Provided Services | The MTP API specification is available at https://docs-theta-api.ricoh360.com/usb-api/ |
How to use
When controlling via USB, it must be determined whether the device is to be used as an MTP device or as an MSC device.
When configuring via WebAPI
- Connect via wireless LAN or wired LAN.
- Execute WebAPI.
To set up via Bluetooth
- Connect via BLE.
- Execute Bluetooth®API.
When setting by button operation
- Turn on the THETA.
- Press the Mode button and the Fn button for 2 seconds.
- Select whether or not to connect via MSC the next time the USB connection is made.
Set value
| Set value | Default value | Setting Method | Description | |
| MTP/MSC Selection | MTP | WebAPI | Options._usbConnection Can be set/retrieved in WLAN AP/CL mode |
Select whether to use MTP or MSC when connecting to a PC |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
Operating Device
You can inhibit the operation of the power button, WLAN button, shutter button, mode button, and Fn button on the device.
Holding down the mode button and shutter button for 6 seconds will unlock the operation lock.
Set value
| Set value | Default value | Setting Method | Description | |
| Button lock type | unlock | WebAPI | Options._cameraLock Can be set/obtained in WLAN AP/CL mode |
Select button lock type |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
| Custom button lock settings | unlock | WebAPI | Options._cameraLockConfig Can be set/retrieved in WLAN AP/CL mode |
Select whether to lock each button |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
Device Settings
Location and date/time information is recorded on images and videos. These settings affect the integrity of the information.
Location Information
You can specify whether to add location information to images and videos. If positioning is not possible with the built-in GPS, location information can be set using the API.
You can also choose whether to record azimuth information as true north or magnetic north using the electronic compass.
If the icon is white, the built-in GPS is able to provide positioning.
Setting value
| Setting value | Default value | Setting Method | Description | |
| Location | Not set | WebAPI | Options.gpsInfo Can be set/retrieved in WLAN AP/CL mode |
Location information |
| MTPAPI | 0xD801 GpsInfo |
|||
| BLEAPI | Set Options |
|||
| Assign location information | on | WebAPI | Options._gpsTagRecording Can be set/retrieved in WLAN AP/CL mode |
Select whether to add location information |
| MTPAPI | 0xD832 GPStagRecording |
|||
| BLEAPI | Set Options |
|||
Azimuth Information
You can select whether or not the heading information acquired by the electronic compass is corrected by GPS information.
Set value
| Set value | Default value | Setting Method | Description | |
| Select true north or magnetic north for azimuth information | auto | WebAPI | Options._compassDirectionRef Can be set/obtained in WLAN AP/CL mode |
Selects whether to record azimuth as true north using GPS information |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
Date and time information
You can set the date and time information for this product.
If GPS information is obtained, the time is corrected using GPS information.
If date and time information is obtained from NTP, the time will also be corrected, but the time zone will not be corrected.
Set Value
| Set value | Default value | Setting Method | Description | |
| Date, time, and time zone information | 01/01/2023 00:00:00 |
WebAPI | Options.dateTimeZone Can be set/retrieved in WLAN AP/CL mode |
Date, time, and time zone information |
| MTPAPI | 0x5011 DateTime |
|||
| BLEAPI | Set Options |
|||
Power Condition Settings
The API can be used to control the camera power. However, it is not possible to wake the camera from a powered-off state.
The camera buttons can be used to control power on, sleep, and power off.
Setup Value
| Setup Value | Default value | Setting Method | Description | |
| Power status | OFF | WebAPI | Options._cameraPower Can be set/retrieved in WLAN AP/CL mode |
Set power status |
| MTPAPI | 0x1013 PowerDown 0xD80E SleepMode |
|||
| BLEAPI | Set Options |
|||
| Sleep mode setting | ON | WebAPI | Options._powerSaving Can be set/retrieved in WLAN AP/CL mode |
Power saving mode enable/disable setting |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
| Sleep Mode Transition Time | 180 (seconds) |
WebAPI | Options.sleepDelay Can be set/obtained in WLAN AP/CL mode |
Period of inactivity (in seconds) before entering sleep mode |
| MTPAPI | 0xD803 SleepDelay |
|||
| BLEAPI | Set Options |
|||
| Power off transition time | 600 (seconds) |
WebAPI | Options.offDelay Can be set/retrieved in WLAN AP/CL mode |
Period of inactivity from sleep mode to power off (60+ seconds in seconds) |
| MTPAPI | 0xD81B AutoPowerOffDelaySec |
|||
| BLEAPI | Set Options |
|||
| AutoPowerOffDelaySec | 600 (seconds) |
WebAPI | Options._offDelayUSB Can be set/obtained in WLAN AP/CL mode |
Period of inactivity (in seconds over 60 seconds) before transitioning from sleep mode to power off when connected via USB |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
| Restart | WebAPI | camera._reboot Can be set/retrieved in WLAN AP/CL mode |
Reboot | |
| MTPAPI | N/A | |||
| BLEAPI | N/A | |||
Device Log
The device logs at least 1000 events for critical information assets such as images and video files.
This log can be accessed via WebAPI.
| API Name | getEventLog |
| URL /log/eventLog/eventLog | /log/eventLog |
| Content-Type | Text/plain; |
| Charset | Charset=UTF-8 |
| method | GET |
Vulnerability Response
We recommend firmware updates to address software vulnerabilities. Firmware update information will be posted on our website and smartphone applications.
https://support.ricoh360.com/system-information
How to update the firmware
Please refer to the User's Manual for instructions on how to update the firmware.
Update using the RICOH360 Smartphone App
https:// support.ricoh360.com/manual/a1-ricoh360-app-firm-update-01Update using the basic application for PCs
https://support.ricoh360.com/manual/a1-update-01?apps=ricoh-thetaUpdate from RICOH360 Cloud
https://support.ricoh360.com/manual/ricoh360-web-08Automatic updates via THETA
When connected via wireless LAN CL mode, wired LAN, or LTE dongle, THETA will detect and perform firmware updates.
Firmware updates are detected and updated when the camera goes to sleep or turns off.
Setup Value
| Configuration Value | Default value | Setting method | Description | |
| Automatic firmware update setting | true | WebAPI | Options._autoFirmwareUpdate Can be set/retrieved in WLAN AP/CL mode |
Select whether to automatically update firmware when going to sleep/power off |
| MTPAPI | N/A | |||
| BLEAPI | Set Options |
|||
Delete and initialize registration information
The connection information stored on the THETA can be initialized by performing the following operations.
To delete the RICOH360 registration on the THETA main unit, delete it from the application.
Images and videos stored on the THETA main unit can also be deleted from a USB-connected PC.
| Registration information | Initialization to factory defaults | Reset settings | Initialization of connection information | Storage format |
| WLAN + Mode + 6 sec. long press of shutter button/API | API | WLAN + Mode button 6 sec long press/API | WLAN + Fn + shutter button 6 sec long press/API | |
| Network type | Initialize ( OFF ) | Initialize ( OFF ) | N/A | N/A |
| Wireless LAN Antenna Settings | Initialize ( MIMO ) | N/A | N/A | N/A |
| SSID | Initialize | Initialize | Initialize | N/A |
| Encryption key (passphrase) | Initialize | Initialize | Initialize | N/A |
| Frequency setting ( AP mode ) | Initialize ( 2.4GHz ) | Initialize ( 2.4GHz ) | Initialize ( 2.4GHz ) | N/A |
| Frequency setting (CL mode) | Initialize (by model) | Initialize (by model) | Initialize (by model) | N/A |
| Digest Authentication User Name | Initialize | Initialize | Initialize | N/A |
| Digest Authentication Password | Initialize | Initialize | Initialize | N/A |
| Access point information | Initialize ( delete ) | Initialize ( delete ) | Initialize ( delete ) | N/A |
| Proxy Information | Initialize ( delete ) | Initialize ( delete ) | Initialize ( delete ) | N/A |
| Wired LAN connection settings | Initialize | Initialize | Initialize | N/A |
| Mobile Network Settings | Initialize | Initialize | Initialize | N/A |
| Enable BLE | Initialize ( true ) | Initialize ( true ) | N/A | N/A |
| Bluetooth® status | Initialize ( OFF ) | Initialize ( OFF ) | N/A | N/A |
| Connection information with Bluetooth® peripherals | Initialize ( delete ) | Initialize ( delete ) | Initialize ( delete ) | N/A |
| Connection information with Bluetooth® terminal | Initialize | N/A | Initialize | N/A |
| MTP/MSC Selection | Initialize ( MTP ) | Initialize ( MTP ) | N/A | N/A |
| Button lock type | Initialize ( OFF ) | Initialize ( OFF ) | N/A | N/A |
| Custom Button Lock Settings | Initialize | Initialize | N/A | N/A |
| Location information set by API | delete | N/A | N/A | N/A |
| Assign location information | Initialize ( ON ) | Initialize ( ON ) | N/A | N/A |
| Select true north or magnetic north for azimuth information | Initialize ( auto ) | Initialize ( auto ) | N/A | N/A |
| Date, time zone information | Initialize | Initialize | N/A | N/A |
| Power saving mode setting | Initialize ( ON ) | Initialize ( ON ) | N/A | N/A |
| Sleep mode transition time | Initialize | Initialize | N/A | N/A |
| Power off transition time | Initialize | Initialize | N/A | N/A |
| Power OFF transition time when connected to USB | Initialize | Initialize | N/A | N/A |
| Automatic firmware update setting | Initialize ( true ) | Initialize ( true ) | N/A | N/A |
| Still image/video file | Initialize ( delete ) | N/A | N/A | Initialize ( delete ) |
| Device log | Initialize ( delete ) | N/A | N/A | N/A |
| RICOH360 Registration Information | Initialize ( delete ) | N/A | N/A | N/A |
Set value
| Type of processing | Operation Method | Setting Method ( API ) | |
| Initialization to shipping state | While holding down the WLAN button and Mode button Press the shutter release button for 6 seconds |
WebAPI | camera._initializeDevice Can be set/retrieved in WLAN AP/CL mode |
| MTPAPI | N/A | ||
| BLEAPI | N/A | ||
| Configuration reset | N/A | WebAPI | camera.reset Can be set/retrieved in WLAN AP/CL mode |
| MTPAPI | 0x1017 ResetDevicePropValue [*1]. |
||
| BLEAPI | N/A | ||
| Connection information initialization | While holding down the WLAN button Press Mode button for 6 seconds |
WebAPI | camera._deleteAccessPoint [*2]. Can be set/retrieved in WLAN AP/CL mode |
| MTPAPI | N/A | ||
| BLEAPI | Delete Bluetooth® Peripheral Device [*3]. |
||
| Format | While holding down the WLAN and Fn buttons Press the shutter button for 6 seconds |
WebAPI | camera.delete Can be set/retrieved in WLAN AP/CL mode |
| MTPAPI | 0x100B DeleteObject | ||
| BLEAPI | N/A | ||
[*1] Reset DeviceProperties defined in MTP.
[*2] Deletes the access point information set via the API.
[*3] Only the pairing information with external peripherals will be deleted.