Shooting Still Images Using Only the Camera with the Self-timer Function

1. While pressing the wireless button, press the power button on the camera to turn the power on.

The camera status lamp lights green.

2. Place the camera.

3. Press the shutter button to start the self-timer.

Countdown starts and shooting is performed 5 seconds later.

During countdown, the camera status lamp flashes green and the countdown sound is heard.
(When the remaining time is less than 2 seconds, flashing becomes quicker. When flashing becomes quicker, the countdown sound interval also becomes shorter.)

Note

• Images saved in the internal memory of the camera can be viewed on a smartphone or computer.
  • Viewing Captured Still Images and Videos
  • Importing Still Images and Videos to a Computer
  • Viewing Still Images on a Computer
• Images saved in the internal memory of the camera can be deleted using a smartphone.
  • Deleting Captured Still Images and Videos
• The default countdown time is 5 seconds.
  • Checking and Changing the Shooting Conditions
• If the shutter button is pressed during countdown, shooting can be performed immediately.
  (The self-timer is canceled.)
• To cancel the self-timer, press the mode button.
  (If the remaining countdown time is less than 2 seconds, the self-timer cannot be canceled.)
• The countdown sound volume is linked to the shutter sound volume.
  (When the shutter sound is off, the countdown sound is off either.)
• If the power is turned off and back on, the camera returns to the normal shooting.

Caution

• An accurate date and time are not recorded if images are captured when the camera has never been connected to a smartphone.
• Orientation information may not be recorded correctly if the camera is tilted when shooting.
• The capture mode is limited to the still image capture mode. (The self-timer cannot be used for the video mode.)