Checking and Changing the Camera Settings

1. Tap [Settings] on the main screen.

The [Settings] screen is displayed.

Setting Items

The following setting items are displayed on the [Settings] screen.

Connection

‍The connection status between the camera and the smartphone can be checked.

‍Change Wi-Fi Password

‍The wireless LAN connection status can be checked and the password can be changed. Follow the procedure below to change the password.

1. Enter a new password (8 or more characters) and tap [Change Password] at the bottom of the screen.

Single-byte alphanumeric characters and symbols can be used. (Spaces cannot be used.)

2. When the password has been changed successfully, press the wireless button of the camera to turn the wireless LAN function off and back on.

The password is not changed until the wireless LAN function is turned off.

3. Delete the old camera information used before the password change in the Wi-Fi^TM settings of the smartphone.

4. Enter the new password in the Wi-Fi^TM settings of the smartphone and connect to the camera.

Caution

The password can be changed only when the camera is connected to the smartphone.

Note

• Note that the previous password can no longer be used.
• If you have forgotten the password, press and hold the wireless button to restore the default password. The power turns off automatically when the password is reset successfully.

Cam Bluetooth settings

The on/off status of the camera Bluetooth function and GPS continuous transfer function can be checked, and the status can be switched on/off.

Wi-Fi frequency band

The frequency band for wireless LANs can be changed.

Note

• When the frequency band is set to 5 GHz, use the camera indoors only.
• The changed frequency band becomes effective when the wireless LAN function is turned on next time.

Camera settings

The following camera settings can be checked and changed.

Sleep time

‍The length of time before the camera enters the sleep mode can be set. (3 minutes, 5 minutes, 7 minutes, 10 minutes, OFF)

‍Camera shutter volume*

‍The volume of the shutter sound can be set. (High, Medium, Low, OFF)

‍Transfer method*

‍You can select whether to keep the images on the camera when transferring images from the camera to the smartphone. Select [Copy] to retain the images in the internal memory after transfer or select [Move] to delete the images from the internal memory after transfer.

‍Plug-in*

‍The function enabled when the plug-in is run can be checked.

‍Camera version*

‍The firmware version of the camera can be checked.

‍Camera license*

‍The licenses used for the camera can be checked.

‍My Settings

‍You can save shooting conditions set with a smartphone on the camera.

Shooting conditions registered in My Settings will be enabled when you turn on the power of the camera when it is not connected to a smartphone.

‍Share Settings

‍The account for each social networking service can be set.

* Settings can only be checked and changed when the camera is connected to the smartphone.