Shooting Using the Self-Timer

This section explains how to perform shooting using the self-timer.

1. Place the camera.

2. Turn on the power of the camera and then press the Fn button.

    The self-timer turns on and

    appears on the OLED panel.

‍

3. Press the shutter button.

    The self-timer countdown starts and shooting is performed 5 seconds later.

    During the countdown, the camera status lamp flashes green and the countdown sound is heard. The remaining countdown time is displayed on the OLED panel.

    When the countdown time is less than 2 seconds remaining, the lamp flashes quicker and the countdown sound interval becomes shorter.
‍

Note

• If the shutter button is pressed during the countdown, the self-timer is canceled and shooting is performed immediately.
• To cancel the self-timer, press the mode button. If the remaining countdown time is less than 2 seconds, the self-timer cannot be canceled.
• The countdown sound volume is linked to the shutter sound volume. When the shutter sound is set to off, the countdown sound is off either.

‍

‍