Automatically uploading photos in the camera to RICOH360 Cloud

THETA A1 Cloud Sync Configuration is complete, and if the following conditions are met, images in THETA will be uploaded to the RICOH360 Cloud without going through the RICOH360 app.

• The THETA is connected to the Internet.
  • The wireless LAN router set in Client Mode Connection is within range.
  • The THETA is turned on.
  • The wireless mode of the THETA is set to Client Mode.

When Cloud Sync Configuration is complete,

Automatic upload after shooting (function to automatically change the wireless mode of the THETA from Access Point Mode to Client Mode) is set to ON by default.

Therefore, if you take a remote shot with the RICOH 360 app while within range of the wireless LAN router set in Client Mode Connection and then exit the shooting mode, image upload to the RICOH 360 Cloud will start immediately.

‍

If “Automatic upload after shooting” is turned off:

• Even after exiting the shooting mode of the RICOH360 app, the wireless mode of the THETA will remain in Access Point mode, so images will not be uploaded from the THETA to the RICOH360 Cloud until the wireless mode of the THETA is switched to Client mode.
  • After transferring images from the THETA to your device (app), follow the steps above to upload images from your device (app) to the RICOH360 Cloud.
• You can upload images directly from the THETA to the Cloud by manually setting the THETA to CL mode and connecting to the Internet.