Updating the Camera Firmware Using a Computer

The app is required to update the firmware. Download the app from the following site.
https://support.theta360.com/en/download/

1. Start the basic app for computer.

2. Select [File] → [Firmware Update] in the menu.

3. Follow the instructions on the screen to connect the camera to the computer using the provided USB cable.

4. Select [To next].

5. Check the current version and available version, and select [To next].

The firmware file is transferred to the camera, and the update process starts.

6. When “Firmware Update: Done” is displayed, remove the USB cable from the computer.

Caution

• Fully insert the USB cable when connecting it.
• Do not disconnect the camera from the computer during the firmware file transfer.
• The camera power may not turn on if the firmware update fails. In this case, perform the firmware update again.

Note

The capture mode lamps

and

of the camera flash during the firmware update.