Updating the Camera Firmware Using a Computer

The app is required to update the firmware. Download the app from the following site.

‍https://support.theta360.com/en/download/

1. Start the basic app for computer.

2. Select [File] → [Firmware Update] in the menu.

3. Follow the instructions on the screen to connect the camera to the computer using the provided USB cable.

4. Select [To next].

5. Check the current version and available version, and select [To next].

The firmware file transfer starts.

6. When “Transfer Done” is displayed, follow the instructions on the screen to update the firmware on the device.

Caution

• Fully insert the USB cable when connecting it.
• Do not disconnect the camera from the computer during the firmware file transfer.
• Do not turn off the power during the firmware update, as this may damage the camera.

Note

and

flash alternately on the OLED panel of the camera during the firmware update.