Firmware Auto Update
This is a function for updating the version of THETA connected to RICOH 360 to the latest Firmware Version.
Necessary preparations
Firmware Version:
- THETA X : v2.30.0 or later
- THETA Z1 : v3.10.2 or later
You can set Auto-Update ON/OFF and Update Time in the Web version.
The time zone set in the camera will be applied.
When Auto Update is set to ON, the THETA will automatically start a Firmware Update when the following conditions are met
- A newer Firmware Version than the one already installed on the THETA is released.
- At the Auto Update time you have set,some text
- turn on the power of THETA in the Wi-Fi environment you have registered in Client Mode Connect.
- Turn on the Client Mode on the THETA (Please see here for the procedure to turn on Client Mode).
Supplementary Information